Configure Eth0 on CentOS394

Eth0 is the default network interface on CentOS. It is responsible for connecting your server to the internet. In order to use Eth0, you will need to configure it correctly. This guide will show you how to do that.

1. Check the Status of Eth0

The first step is to check the status of Eth0. You can do this by running the following command:```
ip addr show eth0
```

This command will output a lot of information about Eth0. The most important thing to look at is the "link/ether" line. This line will tell you whether or not Eth0 is connected to a network.

If the "link/ether" line says "link down", then Eth0 is not connected to a network. You will need to connect Eth0 to a network before you can continue.

2. Configure the IP Address

Once Eth0 is connected to a network, you will need to configure the IP address. You can do this by running the following command:```
nmtui
```

This command will open the NetworkManager graphical user interface. Click on the "Edit" button next to the Eth0 connection.

In the "Edit Connection" window, click on the "IPv4" tab. Select the "Method" dropdown menu and choose "Manual".

In the "Addresses" field, enter the IP address that you want to assign to Eth0. In the "Netmask" field, enter the netmask for your network. In the "Gateway" field, enter the IP address of your default gateway.

Once you have entered all of the necessary information, click on the "Save" button.

3. Restart the Network Service

After you have configured the IP address, you will need to restart the NetworkManager service. You can do this by running the following command:```
systemctl restart NetworkManager
```

This command will restart the NetworkManager service. Once the service has restarted, Eth0 will be configured and ready to use.

4. Test the Connection

To test the connection, you can run the following command:```
ping
```

This command will send a ping request to the website. If the ping request is successful, then you will be able to access the internet through Eth0.

Conclusion

Configuring Eth0 on CentOS is a simple process. By following the steps in this guide, you can easily get Eth0 up and running.

2025-01-19

Previous：How to Deposit ETH into Binance: A Comprehensive Guide

Next：On the Tokenomics of Ethereum